Traditional medical door manufacturers usually connect the door body directly with screws. After installation, the screw heads are exposed, which not only affects the overall appearance of the door body but also poses a risk of accidental scratches to users. In addition, to smoothly open and close the existing door body, there is often a certain gap between the bottom of the door body and the ground. For hospitals, external noise can easily enter the ward through the gap at the bottom of the door, which is not conducive to patient rest.

　　WeMedical door manufacturers provide a type of medical door where the screws are set in the edge sealing structure, and the connecting screws are not visible from the outside of the door body, avoiding the risk of users being scratched by the screw heads, making the door body more aesthetically pleasing; moreover, when the edge sealing structure is scratched or damaged, it can be easily replaced, reducing the user's maintenance costs and solving the problem of traditional medical door manufacturers where the steel plate is easily welded to the edge sealing, resulting in a longer service life; additionally, the bottom of the door body is equipped with a sealing structure to prevent external noise from entering the room.WeMedical door manufacturers provide a type of medical door, which includes a door frame and a door body, with the door frame installed on the wall; the door body includes an overlapping main door and a sub-door; one side of the main door, which is away from the sub-door, is hinged to the door frame; both overlapping edges of the main door and sub-door are equipped with a first sealing edge, and both non-overlapping edges of the main door and sub-door are equipped with a second sealing edge, with the second sealing edge connected to the door body by screws, and cavities for accommodating screw heads are provided within the first and second sealing edges. In this utility model, the first sealing edge is set on the overlapping edge of the main door and sub-door, and the second sealing edge is set on the non-overlapping edge of the main door and sub-door. Since both the first and second sealing edges are equipped with cavities for accommodating screw heads, the screw heads used to connect the first sealing edge(the second sealing edge) and the door body can be placed in the cavity, making the connecting screws invisible from the outside of the door body, enhancing the aesthetic appeal of the door body and avoiding the risk of users being scratched by the screw heads. Additionally,WeMedical door manufacturers connect the first sealing edge and the second sealing edge to the door body with screws. When the first sealing edge or the second sealing edge is scratched or damaged, either can be easily replaced, reducing the user's maintenance costs and solving the problem of traditional medical doors where the steel plate is easily welded to the edge sealing, resulting in a longer service life for the door leaf.
　　
    WeMedical door manufacturersInDuring installation, first connect the first base to the overlapping edge of the main door(sub-door), that is, first use screws to connect the bottom of the first groove to the overlapping edge of the main door (sub-door), and then cover the first cap on the first groove. During the covering process, the first block is clamped into the first port, achieving the engagement between the first cap and the first groove, preventing the first cap from loosening. In addition, the first sealing edge of the sub-door and the main door is symmetrically set, so that the edge of the first sealing edge on the main door is oriented towards the indoor (outdoor) direction, thus forming a well-sealed edge sealing structure at the overlap of the main door and sub-door. At this time, the top of the support block contacts the bottom of the support frame, which can support the support frame; when the user presses the switch again, the controller controls the parallelogram hinge telescopic mechanism to move, retracting the support block, controlling the motor to reverse, driving the support frame to descend, allowing the user to open the door and leave the room. The support frame includes a base plate, with both sides of the base plate bent upwards to form two parallel side plates, the bottom of the sealing strip contacting the base plate, the two sides of the sealing strip respectively contacting the side plates, and the top of the sealing strip being flush with the tops of the side plates; the sealing strip is made of sponge. Since the sealing strip is made of sponge, it is soft in texture. During the upward movement of the support frame, the sponge sealing strip is continuously compressed and deformed during contact with the bottom of the door body, wrapping the bottom of the door body in the sealing strip, forming a good seal.

　　WeMedical door manufacturersProvidedMedical dooris currently one of the best products in hospital construction, with advantages such as antibacterial properties, corrosion resistance, sound insulation, and impact resistance.