Traditional door hardware is usually connected directly to the door body with screws. After installation, the screw heads are exposed, which not only affects the overall aesthetics of the door but also poses a risk of accidentally scratching users. The requirements for medical door manufacturers are much higher than for ordinary doors, as wheelchairs, stretchers, and medication carts enter and exit hospitals almost every day, and wooden doors and frames inevitably get bumped and scratched. Not long after the project is put into use, both the door and the door frame suffer varying degrees of damage. The longer the time, the more severe the damage to ordinary medical wooden doors. Due to the special use of ward doors, the design and manufacturing process of medical door manufacturers should largely meet their usage characteristics.Therefore, we medical door manufacturers providea type of easy-to-install medical door.

　　Existing medical doors can be divided into electric sliding doors, spring doors, sliding doors, and revolving doors based on their opening methods. Among them, revolving doors are hinged to the door frame through the door leaf, and the door leaf needs to be fixed to the door body and door frame with screws. When drilling, the door frame and door body must be paired. Even if self-tapping screws are used for connection, the installation process is still quite troublesome. If not operated well, the door body is prone to tilt, and the door cannot close tightly. Doors that have been used for a long time often experience screw detachment on the door leaf, which can cause noise, affect normal use, and even pose safety hazards.
 

　　Wemedical door manufacturers provide a reasonably designed, simply structured, easy-to-install, and highly safe medical door to address the technical issues of inconvenient installation and low safety of medical doors.

　　In order to achieve the above objectives,we medical door manufacturershave a technical solution: an easy-to-install medical door, including a door body, which is equipped with a handle, observation window, and louver on the door body, and a connecting seat is set on the side of the door body away from the handle. On the opposite side of the connecting seat and the door body, there are connecting grooves and connecting protrusions that can be connected. The cross-sectional profile of the connecting seat is"U" shaped, and the connecting protrusion is completely covered within the connecting seat; the side of the connecting seat is evenly provided with multiple screws; the shaft hole has an upper and lower through shaft hole; on the side opposite the connecting groove, there are at least three evenly distributed oil injection holes; the oil injection holes communicate with the shaft hole; the oil injection hole is equipped with a plug. The shape of the connecting protrusion is isosceles trapezoidal, with the bottom corners of the isosceles trapezoid being circular, and the bottom corners of the connecting groove being circular. The door body has an upper limit end and a lower limit end to restrict the vertical position of the connecting seat.,The upper and lower end faces of the connecting seat are equipped with end caps.

　　WeAn easy-to-install medical door from medical door manufacturers, by adding a connecting seat and door shaft on one side of the door body, not only reduces the installation difficulty but also improves stability and safety, facilitates lubrication, and helps reduce rotational noise.Therefore, wemedical door manufacturers have a new design that is reasonable, simple in structure, long-lasting, and suitable for large-scale promotion.