What should the manufacturer of airtight doors say about how to solve the problem of excessive noise during the operation of medical airtight doors?

　　The air-tight door manufacturer talks about how to solve the problem of excessive noise during the operation of medical air-tight doors?

　　Medical air-tight doors are one of the most widely used doors in hospitals today, but if not paid attention to, some problems may inevitably arise, such as excessive noise during operation. How should we deal with such issues? The medical door manufacturer will help you understand, hoping to be of assistance!

　　The sealing door uses a brushless motor, which is small in size and has high power, allowing for long-term trouble-free operation even with frequent opening and closing.

　　Professional vacuum sealing strips are installed around the door, using pressing technology to ensure a tight fit between the door and the door frame, achieving reliable air-tightness when the door is closed.

　　The hanging wheel of the air-tight door may wear out due to prolonged use; simply disassemble, clean, and lubricate it.

　　During operation, the noise generated by the friction between the movable door leaf and the fixed door or wall can be appropriately adjusted. Improper installation of the box and guide rail can cause a resonance effect with the gypsum board of the ceiling.

　　Air-tight door manufacturer: If the door clips or tracks of the fixed door panel are damaged, the box needs to be disassembled to check for damage inside. If there is damage, it needs to be replaced.

　　Some fixed parts are loose and just need to be reinforced.

　　Air-tight door manufacturer: Of course, medical air-tight doors also need proper maintenance during use to reduce the frequency of failures.

　　1. If maintenance is to be performed on the sealing door of the operating room, the sealing door must be cleaned. This includes cleaning the door leaf and the residual moisture on the back surface to avoid corrosion of the door body and some parts.

　　Additionally, the area around the sealing door in the hospital operating room should be kept clean, and dust and debris should be removed in a timely manner to avoid affecting the sensitivity of the sensing device.

　　2. Air-tight door manufacturer: When using the sealing door in the operating room, care should be taken to avoid heavy objects colliding with sharp objects, which could scratch the sealing door, leading to deformation, increased gaps in the door leaf, damage to the surface protective layer, and a decrease in performance.

　　3. During surgery, the coordination of various components of the sealing door in the operating room is very important. Therefore, during maintenance, the guide rails and ground wheels should be regularly maintained and checked, cleaned, and lubricated to avoid potential hazards of the air-tight door.

　　4. Using the sealing door in the operating room can lead to a large accumulation of dust inside the machine case. To avoid improper operation of the sealing door during opening and closing, the machine case should be cleaned regularly, and the power should be turned off to ensure maintenance safety.

　　Air-tight door manufacturer: The sealing door of the operating room is very important for the operating room, as it can prevent excessive external air from entering the sterile operating room while providing convenience for medical staff to enter and exit, avoiding interference with surgeries. Therefore, maintenance of the sealing door in the operating room is necessary to ensure good operational quality.

　　The above is the content explained by the air-tight door manufacturer. Does everyone understand? If there are any unclear points, feel free to contact our medical door manufacturer. Thank you for watching.