Medical door manufacturers talk about the maintenance and repair services of automatic induction doors.

　　Medical door manufacturer talks about the maintenance and repair services of automatic doors

　　1. When an automatic door detects an abnormal fault, do not disassemble it casually; contact the online customer service technical personnel for resolution.

　　2. Medical door manufacturer: When employees leave the magnetic sensing area of the automatic door, after a delay of 1-10 seconds (the duration needs to be set by the main parameters of the automatic door power switch), the automatic door will close automatically. The operation of the automatic door should be smooth without any signs of impact.

　　3. Observe the normal passage route of the automatic door; the daily passage route should be adjusted so that the staff face the automatic door directly, rather than approaching the automatic door at an angle.

　　4. When approaching the automatic door, the total width of the magnetic sensing area of the automatic door sensor should exceed the total width of the door when fully opened.

　　5. Medical door manufacturer: The control board of the automatic door is equipped with an automatic reverse action program: whether in the opening or closing phase, if the door body encounters an obstacle or a person, the door will automatically move in the opposite direction. This is a crucial safety and maintenance function, which prevents collisions and protects the automatic door mechanism from burning out due to overload. Subsequently, when the door leaf retracts, it should automatically execute the learning program without any signal interference; otherwise, the microcontroller will execute the learning program. If it cannot recover for a long time, it may lead to common faults or abnormal functions.

　　6. Detailed and specific regulations should be established for the safety functions of the automatic door. The purpose of these safety functions is to prevent the automatic door from failing to respond appropriately to emergencies during programmed operations.

　　Medical door manufacturer: Common questions when purchasing automatic doors

　　1. Sensors: In hotels and office buildings, high-sensitivity sensors can be selected; in narrow areas frequently passed by people, such as banks or shops in pedestrian crossings, sensors should be chosen.

　　2. Medical door manufacturer: Safety assistance devices: In places like hotels, care should be taken to prevent the automatic door from being held by others. Therefore, infrared sensors should be installed to prevent staff from being trapped.

　　3. Install access control systems and electric locks: In self-service banks, installing automatic doors can enhance the installation of intelligent access control systems and electric locks to control entrances and exits.

　　4. Medical door manufacturer: Equipped with backup power: To ensure that the automatic door can operate normally during a power outage, a backup power supply can be configured.

　　Medical door manufacturer: When customers choose automatic doors, they should pay attention to selecting stainless steel plates, aluminum materials, or aluminum-plastic panels as the door frame and load-bearing beams for the exterior panels, to facilitate future maintenance and prolong the service life of the automatic door. If stone is used as the exterior panel, the construction plan for the automatic door project and the natural stone project must be clarified with the construction company in advance to avoid serious consequences due to coordination errors. Automatic doors generally use glass sliding doors, and currently, pure glass sliding doors and framed glass sliding doors are more common.