Ningbo Automatic Door Manufacturer: Maintenance Methods and Precautions for Sensor Doors

Ningbo Automatic Door Manufacturer: Maintenance Methods for Sensor Doors

Ningbo Automatic Door Manufacturer: Maintenance Precautions for Sensor Doors:

1. The power supply must be set up with a dedicated line and must not be used with other electrical appliances.

2. The product must be installed securely and can only be used after passing the debugging.

3. Ningbo Automatic Door Manufacturer: The control box must be installed in a dry and ventilated place. Do not place it near high-power radio equipment to avoid affecting normal operation. When using the control button, do not apply excessive force to avoid damage.

Ningbo Automatic Door

4. During the operation of the door, it is strictly forbidden for staff and vehicles to stay on a guide rail. Operators should always pay attention to the operation of the door to prevent accidents.

5. The track should be cleaned regularly to prevent debris accumulation that affects the operation of the business.

6. The driver should be lubricated at least once a year, and the sensor door chain should be regularly lubricated. Check for wear issues in various parts, and repair or replace severely worn parts in a timely manner.

7. When pushing or pulling the sensor door, open and close gently, and do not push or pull violently to avoid damage.

8. If the sensor door malfunctions, please promptly notify the management professional maintenance staff for analysis and repair. Non-professionals should not open it without permission.

Ningbo Automatic Door Manufacturer: Types of Sensor Doors

Sensor doors can be classified according to different classification standards:

1. According to the opening method, sensor doors can be divided into: sliding sensor doors and swing sensor doors.

2. According to the production process, sensor doors are divided into: framed doors and frameless doors.

3. According to the different sensing methods, sensor doors can be divided into infrared sensor doors, microwave sensor doors, bank card sensor doors, and touch sensor doors.

Ningbo Automatic Door Manufacturer: Components of Sensor Doors

1. Main Controller: The overall commander of the automatic door. It issues corresponding instructions to guide the motor or electric lock system to work through the use of built-in large application integration blocks.

2. Sensor Detector: The sensor is responsible for receiving signals from the outside world, just like the human eye. When it detects a moving object entering its control range, it sends a pulse signal to the main controller.

3. Power System Motor: Provides the main power for opening and closing the door, controlling the acceleration and deceleration of the moving door leaf.

4. Door Leaf Track: Similar to the fixed track of a train, it restricts the door leaf pulley system to move in a specific direction.

5. Door Leaf Pulley System: Used to control the movement of the door leaf through suspension, and can drive the door leaf to operate under power traction.

6. Timing Belt: Used to transfer the power generated by the motor, pulling the pulley system on the door.

7. Lower Guiding System: A guiding function positioning control device at the bottom of the door leaf, preventing the moving door leaf from swaying back and forth during operation.

Ningbo Automatic Door Manufacturer: Working Principle of Sensor Doors

Ningbo Automatic Door Manufacturer: When the sensor detector detects that someone or something is approaching, it sends a pulse signal to the main controller, which notifies the motor to operate and monitors the motor speed. Thus, it notifies the motor to increase power at a specific time and enter a slow run. After the motor receives a certain operating current, it runs forward, transferring power to the timing belt, which then transfers the power to the lifting system to open the door; the position is determined by the administrator. If there is no moving object in the middle of the door, the sensor detector will send a close signal to the main controller. In this way, the door opens and closes once.