The "sensing" of the induction door is a mode of opening the door. Automatic doors that are commonly seen at hotel, store, and unit entrances are induction doors. The lifespan of induction doors is greatly affected by daily proper use, reasonable maintenance, and timely repairs. Today, I will introduce you to the maintenance management knowledge and working principles of induction doors.

1. Maintenance of Induction Doors

The power supply must be set with a dedicated line and must not be used with other household appliances.

The product can be used after being installed securely and passing debugging.

The control box should be placed in a dry and ventilated area, and it is strictly prohibited to be close to high-power wireless devices to avoid affecting normal operation. When using the control button, do not apply excessive force to avoid damage.

During operation, personnel and vehicles are strictly prohibited from lingering on the track. Operators should pay attention to the operation of the induction door at all times to avoid accidents.

The lines should be regularly cleaned to prevent debris accumulation, which can affect operation.

The driver should be filled with grease at least once a year, and the chain of the induction door should always be filled with lubricating oil. Each component's wear should be checked, and severely worn parts should be repaired or replaced in a timely manner.

When opening the sliding door, do not push hard when opening, closing, or moving slowly to avoid damage.

If the product malfunctions, please immediately notify a professional repairman for maintenance. Non-professionals should not open it without permission.

The above is an introduction to the maintenance knowledge of induction doors, which everyone can understand. Accurate maintenance management of induction doors can extend their lifespan.

2. How to Properly Purchase Induction Doors

Induction doors refer to a system that automatically obtains the door model when a person approaches the door and then opens the door through a driving system. When the person leaves the door, it will automatically close, achieving a controlled process. How to properly purchase an induction door? Below, creative experts will introduce the key points for purchasing induction doors.

Sensors: High-sensitivity sensors can be chosen for high-end hotels and office buildings. In places like banks and stores on the edge of India where people frequently pass, choose sensors for narrow areas.

Safety auxiliary devices: High-end hotels that need to eliminate pinch incidents with induction doors can choose to install anti-dirt infrared sensors.

Set up access control systems and electric locks: After setting up induction doors in self-service banks, access control systems can be added, along with electric locks to control entry and exit.

Backup power supply: A backup power supply can be installed to ensure that the induction door can operate normally during power outages.

The above are the key points for purchasing induction doors. You can understand that the quality of the door accessories directly relates to the lifespan of the door.

3. Principles of Automatic Detection Doors

The thermal signals of automatic induction doors mainly consist of two commonly used signals: microwave radar and infrared sensors. Microwave radar responds to the displacement of objects, thus having a fast response speed, suitable for places where people walk at normal speeds. Its characteristic is that if a person close to the door does not want to exit and remains still, the radar will not respond again, and the automatic door will close, providing a certain level of protection for the door machine. Infrared sensors respond to the presence of objects; as long as a person is within the scanning range of the sensor, it will emit a contact signal. The disadvantage of infrared sensors is that their response speed is slow, making them suitable for places where people move slowly.