Next, let me talk about the installation and selection of air-tight doors.

　　Air-tight door installation

　　Currently, in most large hospitals such as operating rooms, laboratories, and other special places, hospitals have higher regulations on the safety of air-tight doors. Not only should there be reasonable requirements for safety infection devices and other auxiliary safety measures, but also reasonable requirements for the drive characteristics at the entrance and other active safety features. So, what should be noted when choosing to install air-tight doors?

　　1. Choose high-quality products

　　Modern operating room air-tight doors have high technical content, and the reliability of their mechanical equipment, automation technology devices, or intelligent system devices varies, as do their prices. To ensure normal application, fewer failures, durability, and safety, it is essential to use products from large manufacturers as much as possible. The frame of the automatic door in the operating room must ensure that the overall frame is level, vertical, sturdy, tight, and stable.

　　2. Installation of the beam

　　The installation of the upper beam in the operating room is a key step in the entire process. Since the main shell with mechanical equipment and motor control devices is fixed, it specifies that the beam and the beam with the hole side have certain strength, bending rigidity, and reliability. If the design depth in the initial construction drawings is insufficient, the main construction site must contact the design staff for execution. The embedded materials on both sides must be stably fixed to the reinforced concrete components of the building.

　　3. Installation of the notch and guide rail

　　For operating room induction doors with tracks, during the construction, lines should be drawn to accurately embed the wooden beams into the track part under the air-tight door. Additionally, please note that the length of the wooden beams exceeds twice the width of the open door. To ensure the quality of the cut and the aesthetics of the connection between the middle track and the paving, it is not suitable to use the method of removing the groove after.

　　What are the characteristics of air-tight doors?

　　Today's editor specifically knows the characteristics of air-tight doors.

　　1. Good sound insulation: Its structural design and tight seams have test results showing sound insulation above 30dB, meeting relevant standards.

　　2. Good anti-theft properties: Air-tight doors have good accessories and high-grade decorative locks, making it difficult for thieves.

　　3. Good air-tightness: Aluminum alloy windows are equipped with multiple or tape seals in each groove, providing layered air-tightness, which can fully exert the air conditioning effect and save 50% of energy.

　　4. Very sturdy: The reason for choosing air-tight doors is that they are durable. The characteristics of hospital special doors involve frequent closing. Additionally, there are doctors' instructions, with hundreds of openings and closings of doors in a day. Without sturdy characteristics, problems are bound to occur.

　　5. Good moisture-proof effect: After entering the changing seasons, humid weather will also be encountered. At this time, high-quality air-tight doors should be chosen to provide good moisture-proof effects, effectively solving problems. Since this is a relatively basic aspect, it is essential to choose carefully to ensure quality, which can extend the service life.